GFJMC 63217760782 Angel Eyes H8 200W CREE LED Marker Halo Light Error Free Canbus CREE LED Marker Halo Light

I struggled to decide how I should rate them so I'm going to be generous with the 4 stars. So the good: they are bright, the color is great, and the bulbs themselves look to be of decent quality.The bad: these things are MISERABLE to get installed. I seriously contemplated taking the whole front end of the car apart to remove the headlight housings and install them at my bench, but I'm stubborn so I just fought with them... For about 2 hours in total. "easy to install" my @$$...the two boxes on each of them are a NIGHTMARE to get tucked neatly into the housings, and once you are finally successful in getting these lights, blindly, into the hole in the housing, there is little room to get your bugger hooks onto the base of the bulb to lock them into place. I'm not convinced that I ever did get the drivers side bulb fully locked in. I yelled, I swore, I walked away several times... Yet I'm still giving these things 4 stars. It's almost painful to give them 4 stars, but the reality is that the factory housing wasn't intended to have these types of lights stuffed into them like a Thanksgiving turkey and, to my knowledge, none of the other similar kits are any smaller. So... If you want that nice crisp white light instead of a dingy yellow glow, get ready to suffer lol.

The media could not be loaded.  First of all, these are awesome, well put together LED lights, however for the BMW E89 Z4 the housing unit on the factory E89 fitment was designed for the halogen 8H bulb which is far smaller then the GFJMC Replacement Units, The fan housing of the new LED lights and the heat sink was a tad too wide for the boat mechanism of the original BMW fitment, rather then opting to return the lights, I filed down the edges of the heat sink and removed two prongs on the original housing unit, Which enabled a perfect fit. For the price you just can’t beat the quality, I also added the same light to my 2013 BMW 750, and might I add no error malfunction warning.

I read all the reviews taking about how this took 2.5 hours to install even for a aviation engineer. It must be for a different model of car than mine. I have a 2010 750i (F01) and install took me about 10 minutes, 7 of which was spent trying to find a YouTube video for removing the old light. What I did: popped off the lower, larger headlight housing circular cover. Twisted the old bulb housing which came right out (no threads just kind like a twist lock mechanism). Unplugged it. Plugged the new one into the wiring harness. Inserted the new bulb back in the same way I pulled the older one out. Had to mess with the wires a little to get them all to fit in the housing. Put the circular cover back on. And then did the 2nd headlight in about a minute and a half tops.They look way better than the og yellow ones. Inner halo is much brighter than outer but I knew that before buying it. They’re pretty bright and a good color. On the photo I turned down the exposure to see it clearly. Can’t say for sure yet if they’ll last but I’ll try to update later on. I’m happy overall so far.

One halo light went out in my 2008 E93 BMW 328i convertible. I always hated the yellowish tinge of the halo lights compared with the bluish color of the HID headlights, so I inquired about the difficulty in replacing the one halo light. The front bumper had to be completely removed to replace one, so I got these from Amazon and replaced both. Great decision! The new halo lights match the headlights (and are much brighter!) and now I have two new halo lights instead of just one, making the $200 labor fee more reasonable. I’m told that installation was a snap (relatively speaking) and I’m very pleased with the quality and brightness.

I was very disappointed in this product besides the fact that it was incredibly difficult to install because of the added wires and the thickness of the light bulb housing I was disappointed when I saw that these LEDs weren't even bright enough the inner ring of the Halo was nice and bright about the outer ring was very faint I was surprised to see that the stock halogen bulbs were brighter than these light bulbs disappointed

These light are very bright, the lights are hard to get into the housing(on BMW) but, be patient it will go in also, the plus and minus on one side is reversed one of my lights didn't work I had to reverse the plug in and it worked fined with no issues. Also, the smaller capacitor i did not use as it made no difference on the lights on my car. These light are very bright the inner light is brighter of course that's how it is on BMW, but these are very good the lights almost match great set of lights I've had a few pair and these are by far the brightest on both rings.

The H8 angel eyes lamp housing on the 2008 BMW 650is coupe is fitted with a dust cover, and is a smaller compartment. I've tried several LED light sets. The ones without the fan easily fits, but triggers a CEL fault. A Can-Bus resistor harness eliminates the warning light, however, they tend to be long and will not fit within the housing. I tried other LED sets with a fan. Due to the smaller compartment, most are too long.This set fits! And with the built-in resistor set, no CEL. Huge illumination improvement as shown.

These look fantastic and were incredibly easy to install on my 2008 BMW X5. Seller was late shipping to me, and there are other similar ones for $30 less on Amazon that probably do the same thing. Looks nice, just over priced for the product/service.