Input voltage: 220 V. Power: 75 W. Speed: 1004000 rpm. Air pressure: 0 ~ 3 kg / cm2 Package includes: 1 x host. 2 x manual engraving machine. 3 x hoses (2 hoses connected to the hand engraving machine, 1 hose separately) 2 x Spring 1 x foot pedal. 1 x user manual. Operating and setting methods: (1) Close the pressure adjustment knob and twist grip switch to avoid damaging the pressure gauge and pressure valve. (2) Turn on the power and turn on the power switch. (the indicator light illuminates) (3) Set the rotary switch to position 1 or 2. (4) Adjust the air pressure and speed, hold the engraving handle pressed, step on the foot switch, adjust the push button slowly, the pressure gauge shows 1.5 2 kg / cm2 and adjust the speed button so that the two are set for the engraving handle get the maximum effect, please press the low pressure adjustment button. (5) Relieve the foot switch, the engraving handle no longer works and then load the tool. (6) Turn the switch handle into positions 2 and 1 and change the size of the engraving lever (should be turned into position). (7) If you use the rotary engraving handle, turn off the power switch, turn on the twist grip switch, then adjust the push button. Maintenance: (1) After prolonged use of the engraving machine, the water should be drained in the decompression cup on the back of the machine. (2) Add a suitable amount of mechanical oil #10 to the engraving stitch. (3) If a malfunction occurs, do not take the disassembly blindly, check the repair by a professional.
Trustpilot
1 month ago
2 weeks ago
